How It Is Done
A gallium scan is usually done by a nuclear medicine technologist.
The scan pictures are usually interpreted by a
radiologist or
nuclear medicine specialist.
The technologist cleans the site on your arm where the radioactive
tracer will be injected. A small amount of the radioactive tracer is then
injected. You will need to return between 24 and 96 hours later for the
diagnostic scans. Gallium scans are usually done at 48 hours and repeated at 72
hours after the tracer is injected.
When you come in for the scan, you will need to remove any
jewellery that might interfere with the scan. You may need to take off all or
most of your clothes, depending on which area is being examined (you may be
allowed to keep on your underwear if it does not interfere with the test). You
will be given a cloth or paper covering to use during the test.
You will lie on your back on a table, and a large scanning camera
will be positioned closely above you. After the radioactive tracer is injected,
the camera will scan for radiation released by the tracer and produce pictures
of the tracer in your tissues. The camera may move slowly above and around your
body. The camera does not produce any radiation, so you are not exposed to any
additional radiation while the scan is being done.
You may be asked to move into different positions so the area of
interest can be viewed from other angles. You need to lie very still during
each scan to avoid blurring the pictures. You may be asked to hold your breath
briefly during some of the scans.
Each scan may take about 60 to 90 minutes.