Dialysis removes
urea and other waste products from the blood. To find
out how well dialysis is working, you will have blood tests that look at the
level of urea in your blood. Usually, these tests are done once a month, at the
beginning of your session and again at the end. In general, two measures
indicate how well dialysis is working: urea reduction ratio (URR) and
Kt/V.
Urea reduction ratio
One way to measure how well hemodialysis is removing urea from the
body is to measure
blood urea nitrogen (BUN) level. The BUN is measured
before and after your treatment session. Then, the two numbers are compared to
see how much the urea level in the blood has decreased. This difference is
called the urea reduction ratio (URR), and it is usually expressed as a
percentage. An adequate dose of hemodialysis should result in an average URR of
65%.1
Kt/V
Another way to measure the effectiveness of hemodialysis is to
compare the amount of fluid that is cleared of urea during each dialysis
session with the amount of fluid that exists in the body. This is called the
Kt/V.
- Kt represents the amount
of fluid that is cleared of urea during each dialysis session. It is measured
in millilitres per minute (mL/min).
- V
represents the volume of water a person's body contains.
The Kt/V is the most accurate measure of hemodialysis because it
also measures the amount of urea removed with excess fluid and takes into
consideration other factors, such as weight loss during dialysis. An adequate
dose of hemodialysis should result in an average Kt/V of 1.2.1
What to think about
- An adequate dose of dialysis can usually be
delivered in 3 to 5 hours.
- Inadequate doses of hemodialysis
(hemodialysis URR percentages that average below 65% or Kt/V values below 1.2)
increase the risk of complications and death.2